Product Calculator

Melt ice and snow while providing traction! Use SAKRETE 50/50 Salt & Sand, a mixture of de-icing salt and all-purpose sand. Available in 20 KG bags. Go with SAKRETE, The Pro’s Choice since 1936.
Product Codes: 13823020, 23823020
• Mixture of de-icing salt and all-purpose sand
• Ideal for melting ice and snow while providing traction, on all outdoor pavements
• Use on driveways, interlocking pavers, loading docks, sidewalks and roadways
• Melt ice and snow in temperatures as cold as -7 °C (+20 °F)
• Not intended for use on concrete in poor condition or new concrete cured for less than 12 months
• Easy to apply; sprinkle a thin layer over snow or ice and scrape off slush
Use on all outdoor pavements such as driveways, interlocking pavers, loading docks, sidewalks, steps, roadways or under tires.
Sprinkle a thin layer over snow or ice. Do not over apply. Scrape off slush. Keep contents sealed. Ice melters should not be used on concrete which is in poor condition or new concrete cured for less than 12 months.
Do not swallow. Do not get in eyes.
FIRST AID TREATMENT: If in eyes, rinse with water.
This product is designed to meet the performance specifications outlined in this product data sheet. If the product is used in conditions for which it was not intended, or applied in a manner contrary to the written recommendations contained in the product data sheet, the product may not reach such performance specifications. The foregoing is in lieu of any other warranties, representations or conditions, expressed or implied, including, but not limited to, implied warranties or conditions of merchantable quality or fitness for particular purposes, and those arising by statute or otherwise in law or from a course of dealing or usage of trade.
Melt ice and snow while providing traction! Use SAKRETE 50/50 Salt & Sand, a mixture of de-icing salt and all-purpose sand. Available in 20 KG bags. Go with SAKRETE, The Pro’s Choice since 1936.
Product Codes: 13823020, 23823020
• Mixture of de-icing salt and all-purpose sand
• Ideal for melting ice and snow while providing traction, on all outdoor pavements
• Use on driveways, interlocking pavers, loading docks, sidewalks and roadways
• Melt ice and snow in temperatures as cold as -7 °C (+20 °F)
• Not intended for use on concrete in poor condition or new concrete cured for less than 12 months
• Easy to apply; sprinkle a thin layer over snow or ice and scrape off slush
Product Identifier |
Ice Melting Products |
Other Means of Identification |
KING De-Icing Salt, KING 50/50 Salt & Sand |
Product Family |
KING Home Improvement Products |
Recommended Use |
Use on all outdoor pavements such as driveways, interlocking pavers, loading docks, sidewalks, steps, roadways, etc. |
Restrictions on Use |
None known. |
Manufacturer | King Packaged Materials Company, 3385 Harvester Road, Burlington, Ontario, L7R 3Y5, www.kpmindustries.com |
Emergency Phone No. | King Packaged Materials Company, (800) 461-0566, 8:30am-4:30pm, Chemtrec, (800) 424-9300, 24 hours/7 days a week |
SDS No. | 0165 |
Date of Preparation | December 5, 2016 |
Classification
Carcinogenicity – Category 1A; Specific target organ toxicity (single exposure) – Category 3; Specific target organ toxicity (repeated exposure) – Category 1
Label Elements
Signal Word:
Danger
Hazard Statement(s):
May cause cancer.
May cause respiratory irritation.
Causes damage to organs (lungs) through prolonged or repeated exposure.
Precautionary Statement(s):
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Wash hands thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Do not eat, drink or smoke when using this product.
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE or doctor.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with local, regional, national and international regulations.
Other Hazards
None known.
Mixture:
Chemical Name | CAS Registry No. | Concentration % | Other Identifiers |
Sodium chloride | 7647-14-5 | 50-100% | Not applicable |
Portland cement | 14808-60-7 | 50%-Max | Not applicable |
Notes
The exact percentage (concentration) of composition has been withheld as a trade secret in accordance with paragraph (i) of §1910.1200.
First-Aid Measures
Inhalation
Move to fresh air. Keep at rest in a position comfortable for breathing. Call a Poison Centre or doctor if you feel unwell.
Skin Contact
Rinse with lukewarm, gently flowing water for 5 minutes. Take off immediately contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Thoroughly clean clothing, shoes and leather goods before reuse or dispose of safely. If skin irritation or a rash occurs, get medical advice or attention.
Eye Contact
Immediately rinse the contaminated eye(s) with lukewarm, gently flowing water for 15-20 minutes, while holding the eyelid(s) open. Remove contact lenses, if present and easy to do. Immediately call a Poison Centre or doctor.
Ingestion
Never give anything by mouth if person is rapidly losing consciousness, or is unconscious or convulsing. Do not induce vomiting. Get medical advice or attention if you feel unwell or are concerned.
Most Important Symptoms and Effects, Acute and Delayed
If inhaled: can irritate the nose and throat. Can cause lung injury. If on skin: skin sensitizer. May cause an allergic skin reaction in some people. May cause moderate to severe irritation. If in eyes: causes moderate to severe irritation. Symptoms include sore, red eyes, and tearing. If swallowed: can irritate the mouth, throat and stomach. Symptoms may include nausea, vomiting, stomach cramps and diarrhea.
Immediate Medical Attention and Special Treatment
Special Instructions
Not applicable.
Extinguishing Media
Suitable Extinguishing Media
Not combustible. Use extinguishing agent suitable for surrounding fire.
Unsuitable Extinguishing Media
None known.
Specific Hazards Arising from the Product
This product presents no unusual hazards in a fire situation.
Special Protective Equipment and Precautions for Fire-Fighters
Approach fire from upwind to avoid hazardous vapours or gases. Fire-fighters may enter the area if positive pressure SCBA and full Bunker Gear is worn.
Personal Precautions, Protective Equipment, and Emergency Procedures
Use the personal protective equipment recommended in Section 8 of this safety data sheet. Evacuate the area immediately. Isolate the hazard area. Keep out unnecessary and unprotected personnel.
Environmental Precautions
It is good practice to prevent releases into the environment. Do not allow into any sewer, on the ground or into any waterway.
Methods and Materials for Containment and Cleaning Up
Collect using shovel/scoop or approved HEPA vacuum and place in a suitable container for disposal. Avoid generating dust.
Precautions for Safe Handling
Avoid repeated or prolonged skin contact. Do not swallow. Do not breathe in this product. Avoid generating dusts. Keep containers tightly closed when not in use or empty. Do NOT eat, drink or store food in work areas.
Conditions for Safe Storage
Store in the original, labelled, shipping container. Store in an area that is: dry, well-ventilated. Protect product from contact with water, including humidity. Prevent rainwater and ground water from reaching storage area.
Control Parameters
ACGIH TLV® |
OSHA PEL |
AIHA WEEL |
|||||
Chemical Name |
TWA |
STEL |
TWA |
Ceiling |
8-hr TWA |
TWA |
|
Silica, total quartz | 0.05 mg/m3 (R) A2 |
0.1 mg/m3 |
Appropriate Engineering Controls
Use local exhaust ventilation, if general ventilation is not adequate to control amount in the air.
Individual Protection Measures
Eye/Face Protection
Wear chemical safety goggles and face shield when contact is possible.
Skin Protection
Wear chemical protective clothing e.g. gloves, aprons, boots.
Respiratory Protection
Wear a NIOSH approved particulate respiratory equipped with an N95, R95, or P95 filter.
Basic Physical and Chemical Properties
Appearance | Solid crystals |
Odour | Odourless |
Odour Threshold | Not available |
pH | 7 |
Melting Point/Freezing Point |
801 °C (melting); Not available (freezing) |
Initial Boiling Point/Range |
Not available |
Flash Point |
Not available |
Evaporation Rate |
Not available |
Flammability (solid, gas) |
Not applicable |
Upper/Lower Flammability or Explosive Limit |
Not available (upper); Not available (lower) |
Vapour Pressure |
Not available |
Vapour Density (air = 1) |
Not available |
Relative density (water = 1) |
2.5 |
Solubility | Not available (in water); Not available (in other liquids) |
Partition Coefficient, n-Octanol/Water (Log Kow) | Not available |
Auto-Ignition Temperature | Not available |
Decomposition Temperature | Not available |
Viscosity | Not available (kinematic); Not available (dynamic) |
Physical State | Solid |
Reactivity
Not reactive under normal conditions of use.
Chemical Stability
Normally stable.
Possibility of Hazardous Reactions
None expected under normal conditions of storage and use.
Conditions to Avoid
Water, moisture or humidity.
Incompatible Materials
None known.
Hazardous Decomposition Products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Likely Routes of Exposure
Inhalation; skin contact; eye contact; ingestion.
Acute Toxicity
Chemical Name | LC50 | LD50 (oral) | LD50 (dermal) |
Silica, total quartz | 500 mg/kg (rat) |
Skin Corrosion/Irritation
May cause moderate or severe irritation based on information for closely related materials.
Serious Eye Damage/Irritation
May cause serious eye damage based on information for closely related materials.
STOT (Specific Target Organ Toxicity) – Single Exposure
Inhalation
May cause severe nose and throat irritation, severe lung injury.
Skin Absorption
No information was located.
Ingestion
May be harmful based on information for closely related materials.
Aspiration Hazard
Can cause lung damage if aspirated based on human experience.
STOT (Specific Target Organ Toxicity) – Repeated Exposure
Causes irritation of the respiratory system. Respiratory tract injury has been observed. Respirable crystalline silica in the form of quartz or cristobalite from occupational sources is listed by the International Agency for Research on Cancer (IARC) and National Toxicology Program (NTP) as a lung carcinogen. Prolonged exposure to respirable crystalline silica has been known to cause silicosis, a lung disease, which may be disabling. While there may be a factor of individual susceptibility to a given exposure to respirable silica dust, the risk of contracting silicosis and the severity of the disease is clearly related to the amount of dust exposure and the length of time (usually years) of exposure.
Respiratory and/or Skin Sensitization
May cause an allergic reaction (skin sensitization) based on information for closely related chemicals.
Carcinogenicity
Chemical Name | IARC | ACGIH® | NTP | OSHA |
Silica, total quartz | Group 1 | A1 | Known carcinogen |
May cause cancer.
Reproductive Toxicity
Development of Offspring
No information was located.
Sexual Function and Fertility
No information was located.
Effects on or via Lactation
No information was located.
Germ Cell Mutagenicity
No information was located.
Interactive Effects
No information was located.
Ecotoxicity
May cause long lasting harmful effects to aquatic life.
Persistence and Degradability
No information was located.
Bioaccumulative Potential
No information was located.
Mobility in Soil
No information was located.
Other Adverse Effects
There is no information available.
Disposal Methods
Contact local environmental authorities for approved disposal or recycling methods in your jurisdiction.
Not regulated under US DOT Regulations.
Environmental Hazards
Not applicable
Special Precautions
Not applicable
Transport in Bulk According to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
Safety, Health and Environmental Regulations
Canada
WHMIS 1988 Classification
Class D2A, Class E
D2A – Very Toxic (Chronic toxicity; Carcinogenicity); E – Corrosive
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the SDS contains all of the information required by the Controlled Products Regulations.
USA
Toxic Substances Control Act (TSCA) Section 8(b)
All ingredients are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.
Additional USA Regulatory Lists
This product contains a chemical known to the State of California to cause cancer.
SDS Prepared By | King Packaged Materials Company |
Phone No. | 905-639-2993 |
Date of Preparation | December 5, 2016 |
To the best of our knowledge, the information contained herein is accurate. However, neither KPM Industries Ltd., nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.