SAKRETE Concrete Expansion Joint

Limit water penetration and abrasion in concrete joints! Use SAKRETE Concrete Expansion Joint, an innovative and flexible material for concrete expansion and isolation joints. Packaged in 50 foot lengths. Go with SAKRETE, The Pro’s Choice since 1936.

Product Code: 12021113

• High quality, lightweight material used to limit water penetration and reduce abrasion in concrete during expansion
• Ideal for use in slabs, walks, drives and isolation joints
• Designed to prevent slab-cracking and reduce pushing against existing materials
• Replaces outdated asphalt and fiber expansion joints
• Tear-off strip is included to accommodate sealant material
• Resistant to common chemicals and oils


1. FEATURES & BENEFITS

• Flexible; will not break or crack when used around curves or columns
• Closed cell construction allows no water absorption
• Resistant to common oils and chemicals due to high quality nonabsorbent polyethylene
• Tear-off strip is included
• Lightweight

2. USES

Use wherever concrete expansion joints are applicable: slabs, drives, sidewalks, isolation joints and in all standard concrete construction such as highways, runways and parking garages.

3. PROCEDURES

READ ALL DIRECTIONS BEFORE STARTING WORK.
ATTENTION: WEAR GLOVES, SAFETY GLASSES AND PROTECTIVE CLOTHING!

PROCEDURES
Placing:

  1. Unroll and cut to length needed. One roll is 15.25 m (50’) long.
  2. Attach to adjacent material (i.e. existing concrete, block, brick, etc.) before pouring concrete. Attachment can be made with construction adhesive, nails or staples. Make certain that the top
    of the expansion joint is at the top of the planned concrete pour.
  3. Expansion joint material comes with a built-in, 13 mm (1/2″) tear-off strip. Place tear-off strip up if caulking is desired after concrete hardens. Place tear-off strip down if no caulking is planned.
  4. Pour concrete and finish. After concrete hardens, if tear-off strip was placed up, remove strip and seal area with suitable caulking.

4. TECHNICAL DATA

Exceeds ASTM D-4819/D-3575.

5. YIELD

Fills a space approximately 15.25 m (50′) long x 10 cm (4”) high x 13 mm (1/2″) wide.

6. SAFETY PROCEDURES

Read and understand the Safety Data Sheet (SDS) before using this product.

WARNING: Wear protective clothing and equipment.
KEEP OUT OF REACH OF CHILDREN.

Warranty

This product is designed to meet the performance specifications outlined in this product data sheet. If the product is used in conditions for which it was not intended, or applied
in a manner contrary to the written recommendations contained in the product data sheet, the product may not reach such performance specifications. The foregoing is in lieu of any other warranties, representations or conditions, expressed or implied, including, but not limited to, implied warranties or conditions of merchantable quality or fitness for particular purposes, and those arising by statute or otherwise in law or from a course of dealing or usage of trade.

Limit water penetration and abrasion in concrete joints! Use SAKRETE Concrete Expansion Joint, an innovative and flexible material for concrete expansion and isolation joints. Packaged in 50 foot lengths. Go with SAKRETE, The Pro’s Choice since 1936.

Product Code: 12021113

• High quality, lightweight material used to limit water penetration and reduce abrasion in concrete during expansion
• Ideal for use in slabs, walks, drives and isolation joints
• Designed to prevent slab-cracking and reduce pushing against existing materials
• Replaces outdated asphalt and fiber expansion joints
• Tear-off strip is included to accommodate sealant material
• Resistant to common chemicals and oils


Article Disclaimer

For the purpose of hazard communication, SAKRETE Concrete Expansion Joing is an “Article” as defined in 29 CFR 1910.1200(c): Article means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g. minute or trace amounts of hazardous chemical (as determined under paragraph (d) of this section), and does not pose a physical hazard or health rick to employees.


Product Calculator


How Much Do I Need?

Calculate how much of a product you need, then add it to your Shopping List.
Jump To Calculator Icon

Jump To Calculator


How-To Video

More Information

SAKRETE Concrete Expansion Joints can be used for concrete slabs, driveways, sidewalks, highways, runways and parking garages. To learn more, reference the Uses section of the Technical Data Sheet.